|
|
|
National Stock Number:
5310-01-234-1411
Federal Supply Class:
5310
National Item Identification Number:
012341411
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 3903723 | 15434 | CUMMINS INC. | | 3903723 | ZC672 | CUMMINS SOUTH PACIFIC PTY LTDHEAD OFFICE | | 5310PL0823515 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | J90372-3 | F2758 | CNH INDUSTRIAL FRANCE |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HARDNESS RATING | 60.0 ROCKWELL A MINIMUM AND 62.0 ROCKWELL A MAXIMUM | | HOLE DIAMETER | 0.213 INCHES NOMINAL | | OVERALL DIAMETER | 0.383 INCHES MINIMUM AND 0.403 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A29, UNS G10080 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1008 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.043 INCHES NOMINAL |
|
|