| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 1.000 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| DISTANCE FROM BASE TO CENTER OF APERTURE | 0.290 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-367,T6 FED SPEC SINGLE MATERIAL RESPONSE NUT |
| MATERIAL | ALUMINUM ALLOY 2014 NUT |
| MATERIAL | STEEL COMP 304 THREADS |
| MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| NUT STYLE | PLATE |
| NUT HEIGHT | 2.640 INCHES NOMINAL |
| NUT LENGTH | 2.700 INCHES NOMINAL |
| NUT MOUNTING PROVISION | STRAIGHT HOLES |
| PLATE THICKNESS | 0.040 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| PLATE WIDTH | 1.460 INCHES MINIMUM AND 1.570 INCHES MAXIMUM |
| SPECIAL FEATURES | INSERT LOCATED IN END OPPOSITE PLATE; HOLE DRILLED THRU 0.063 IN. MIN AND 0.070 IN. MAX DIA AND 0.420 IN. FROM END |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 1 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE NUT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2 FED SPEC SINGLE TREATMENT RESPONSE THREADS |
| SURFACE TREATMENT | ANODIZE OR CHROMATE NUT |
| SURFACE TREATMENT | CADMIUM AND CHROMATE THREADS |
| THREAD CLASS | 2B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES | UNF |