|
|
|
National Stock Number:
5310-01-232-3925
Federal Supply Class:
5310
National Item Identification Number:
012323925
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 326015198 | D1876 | WARTSILA ELAC NAUTIK GMBH | | C5-15-8098 | 81361 | EDGEWOOD CHEMICAL BIOLOGICAL CENTER ECBC | | H5-15-8098-1 | 24384 | SYPRIS ELECTRONICS, LLC |
|
Techincal Specification:
| HOLE DIAMETER | 0.170 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-D-4000 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.100 INCHES NOMINAL | | MATERIAL | PLASTIC POLYAMIDE OVERALL AND GLASS OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 0.641 INCHES NOMINAL | | RECESS ANGLE | 82.0 DEGREES NOMINAL | | RECESS DIAMETER | 0.230 INCHES NOMINAL | | SPECIAL FEATURES | OUTSIDE EDGES ROUNDED | | STYLE DESIGNATOR | RECESSED |
|
|