|
|
|
National Stock Number:
5310-01-232-0444
Federal Supply Class:
5310
National Item Identification Number:
012320444
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 35308 | 07148 | UNITED TECHNOLOGIES CORP HAMILTON SUNDSTRAND CORP | | 35308 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| BOSS DIAMETER | 0.270 INCHES MINIMUM AND 0.274 INCHES MAXIMUM | | BOSS THICKNESS | 0.050 INCHES NOMINAL | | COUNTERBORE DIAMETER | 0.200 INCHES NOMINAL NUT | | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL NUT | | CROSS-SECTIONAL SHAPE | ROUND BOTH ENDS | | MATERIAL DOCUMENT AND CLASSIFICATION | DCC 490,TY 4,FSCM 07148 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | ALUMINUM ALLOY 6061 OVERALL | | NOMINAL THREAD SIZE | 0.138 INCHES | | NUT DIAMETER | 0.438 INCHES NOMINAL | | NUT COUNTERBORE DEPTH | 0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM NUT | | NUT LENGTH | 0.175 INCHES NOMINAL | | NUT STYLE | SLEEVE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-26074,CL 4,GR B MIL SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT THREADS | | SURFACE TREATMENT | NICKEL OVERALL EXCEPT THREADS | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | UNC | | THREAD QUANTITY PER INCH | 32 |
|
|