5310-01-064-7807, WASHER,FLAT

National Stock Number:
5310-01-064-7807

Federal Supply Class:
5310

National Item Identification Number:
010647807

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Manufacturer Information:

GW10U621SC2

26512

NORTHROP GRUMMAN SYSTEMS CORPORATION

Techincal Specification:

CENTER HOLE SHAPE STYLE	ROUND
CROSS-SECTIONAL SHAPE STYLE	RECTANGULAR
HOLE DIAMETER	0.256 INCHES MINIMUM AND 0.276 INCHES MAXIMUM
OVERALL DIAMETER	0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-18729 COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 4130 OVERALL
PERIPHERAL SHAPE STYLE	ROUND
SPECIFICATION/STANDARD DATA	26512-GW10U MANUFACTURERS STANDARD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THICKNESS	0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM

Click here to Register for Free 30-day Trial