|
|
|
National Stock Number:
5310-00-177-8092
Federal Supply Class:
5310
National Item Identification Number:
001778092
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 10935635 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| THREAD SERIES | UNC | | NOMINAL THREAD SIZE | 0.375 INCHES | | THREAD QUANTITY PER INCH | 16 | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL COMP 1030 OR | | STEEL COMP 1040 OR | | STEEL COMP 12L14 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC 1ST MATERIAL RESPONSE OR | | QQ-S-637A FED SPEC 2ND MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OR | | ZINC OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC 1ST TREATMENT RESPONSE OR | | QQ-Z-325,TYPE 2,CLASS 2 FED SPEC 2ND TREATMENT RESPONSE OVERALL | | NUT STYLE | SLEEVE | | THREAD LENGTH | 0.620 INCHES NOMINAL | | FLANGE THICKNESS | 0.310 INCHES NOMINAL | | NUT DIAMETER | 0.493 INCHES MINIMUM AND | | 0.498 INCHES MAXIMUM | | NUT LENGTH | 0.810 INCHES NOMINAL | | FLANGE WIDTH ACROSS FLATS | 0.620 INCHES NOMINAL | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE TYPE AND QUANTITY | 2 DRILLED | | DRILLED HOLE DIAMETER | 0.375 INCHES NOMINAL | | COUNTERBORE DIAMETER | 0.410 INCHES NOMINAL NUT | | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL NUT | | CROSS-SECTIONAL SHAPE | HEXAGONAL NUT |
|
|