|
|
|
National Stock Number:
5310-00-172-6333
Federal Supply Class:
5310
National Item Identification Number:
001726333
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10147 | 0UES3 | MID-AMERICA AEROTECH, LLC | | 10147 | 19156 | MOOG INC | | 10147 | 79294 | E-SYSTEMS INC MONTEK DIV FLUID CONTROLS OPNS | | 10147 | 94697 | MOOG INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 301 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059,FULL HARD MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | WPS-10012,FSCM 79294 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.203 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.300 INCHES MINIMUM AND | | 0.310 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.032 INCHES NOMINAL | | SURFACE FINISH | 100.0 MICROINCHES ALL SURFACES | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 94697 | | DESIGN CONTROL REFERENCE | 10147 |
|
|