|
|
|
National Stock Number:
5310-00-167-0657
Federal Supply Class:
5310
National Item Identification Number:
001670657
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 004-003081-002 | 26916 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 10116601 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 2411502 | 001JK | EMBRAER S.A. DBA EMBRAER | | 24-00019-052 | 00724 | RAYTHEON COMPANY | | 43W225420 | 79313 | WHITNEY VINCENT CO INC | | 2411502 | S4956 | EMBRAER EMPRESA BRASILEIRA DE AERONAUTICA SA | | 911234 | 06848 | HONEYWELL INTERNATIONAL INC | | 8168215 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | FFW92TYPEAGRADE2CLASSAREGULAR | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | AN960-3 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | 5310PL0150715 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 5310PL1368588 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | AN960&2 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | ASNA2397-3 | F6198 | AIRBUS OPERATIONS | | RY8012-2 | 78022 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7952 MIL SPEC SINGLE MATERIAL RESPONSE OR | | QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.095 INCHES MINIMUM AND | | 0.115 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.245 INCHES MINIMUM AND | | 0.270 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.022 INCHES MINIMUM AND | | 0.042 INCHES MAXIMUM | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 88044 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | AN960-3 | | MANUFACTURERS CODE | 81348 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | FFW92TYPEAGRADE2CLASSAREGULAR |
|
|