|
|
|
National Stock Number:
5310-00-145-2067
Federal Supply Class:
5310
National Item Identification Number:
001452067
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 0N124544-3 | 98230 | NATIONAL SECURITY AGENCY |
|
Techincal Specification:
| MATERIAL | STEEL COMP 302 OR | | STEEL COMP 304 OR | | STEEL COMP 316 OR | | STEEL COMP 324 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.135 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.200 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.015 INCHES NOMINAL | | TEST DATA DOCUMENT | 98230-0N124544-3 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | HEAT TREATMENT | COLD DRAWN 1/4 HARD CONDITION | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | MINIMUM YIELD STRENGTH | 75000 POUNDS PER SQUARE INCH | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 98230 | | DESIGN CONTROL REFERENCE | 0N124544-3 |
|
|