|
|
|
National Stock Number:
5310-00-145-1857
Federal Supply Class:
5310
National Item Identification Number:
001451857
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 253063 | 0KDP7 | KIDDE-FENWAL, LLC | | 253063 | 78062 | SARGENT AEROSPACE & DEFENSE, LLC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OR | | MIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND | | 43.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | RECESSED | | HOLE DIAMETER | 0.314 INCHES MINIMUM AND | | 0.318 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.583 INCHES MINIMUM AND | | 0.603 INCHES MAXIMUM | | RECESS DIAMETER | 0.407 INCHES NOMINAL | | MATERIAL THICKNESS | 0.057 INCHES MINIMUM AND | | 0.069 INCHES MAXIMUM | | RECESS ANGLE | 70.0 DEGREES MINIMUM AND | | 90.0 DEGREES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 78062 | | DESIGN CONTROL REFERENCE | 253063 |
|
|