|
|
|
National Stock Number:
5310-00-143-9535
Federal Supply Class:
5310
National Item Identification Number:
001439535
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| GN10FM64 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| THREAD SERIES | UNJ | | NOMINAL THREAD SIZE | 4.000 INCHES | | THREAD QUANTITY PER INCH | 16 | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | ALUMINUM ALLOY 7075 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9 TEMPER T7351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | NUT STYLE | ROUND | | DRIVE POINT DEPTH | 0.146 INCHES MINIMUM AND | | 0.166 INCHES MAXIMUM | | NUT DIAMETER | 4.484 INCHES MINIMUM AND | | 4.516 INCHES MAXIMUM | | NUT THICKNESS | 0.328 INCHES MINIMUM AND | | 0.359 INCHES MAXIMUM | | DRIVE POINT WIDTH | 0.240 INCHES MINIMUM AND | | 0.260 INCHES MAXIMUM | | DRIVE POINT QUANTITY | 2 | | HOLE CONFIGURATION STYLE | CONFIGURATION J | | HOLE TYPE AND QUANTITY | 6 DRILLED | | DRILLED HOLE DIAMETER | 0.045 INCHES NOMINAL | | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL NUT | | SPECIFICATION/STANDARD DATA | 26512-GN10FM MANUFACTURERS STANDARD | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
|
|