|
|
|
National Stock Number:
5310-00-136-1606
Federal Supply Class:
5310
National Item Identification Number:
001361606
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 334095 | 62983 | EATON AEROSPACE, LLC |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | VS1-1-7-19 FSCM 62983 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND | | 45.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | HOLE DIAMETER | 0.989 INCHES NOMINAL | | OUTSIDE DIAMETER | 1.434 INCHES NOMINAL | | MATERIAL THICKNESS | 0.119 INCHES NOMINAL | | TOP RECESS DIAMETER | 1.039 INCHES MINIMUM AND | | 1.049 INCHES MAXIMUM | | BOTTOM RECESS DIAMETER | 1.039 INCHES MINIMUM AND | | 1.049 INCHES MAXIMUM | | BOTTOM RECESS ANGLE | 90.0 DEGREES NOMINAL | | TOP RECESS ANGLE | 90.0 DEGREES NOMINAL | | HEAT TREATMENT | QUENCHED AND | | TEMPERED | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 62983 | | DESIGN CONTROL REFERENCE | 334095 |
|
|