|
|
|
National Stock Number:
5310-00-017-0782
Federal Supply Class:
5310
National Item Identification Number:
000170782
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10907323 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 5310000170782 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5310000170782 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1025 OR | | STEEL COMP 1035 OR | | STEEL COMP 1040 OR | | STEEL COMP 1541 OR | | STEEL COMP 1042 OR | | STEEL COMP 1043 OR | | STEEL COMP 1045 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A576 ASSN STD ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.390 INCHES MINIMUM AND | | 0.422 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.562 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.250 INCHES NOMINAL | | SPECIAL FEATURES | TWO HOLES DRILLED THRU 0.125 IN. MIN 0.129 IN. MAX DIA 180 DEG APART ONE HOLE LOCATED 0.469 IN. FROM WASHER CENTERLINE ONE 0.659 IN. FROM WASHER CENTER LINE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 19207 | | DESIGN CONTROL REFERENCE | 10907323 |
|
|