5310-00-012-0379, WASHER,LOCK

National Stock Number:
5310-00-012-0379

Federal Supply Class:
5310

National Item Identification Number:
000120379

Description:
WASHER,LOCK

Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces

Manufacturer Information:

10-20395	28839	TELEDYNE INDUSTRIES INC TELEDYNE POWER SYSTEMS DIV
10-20395	59501	UNISON INDUSTRIES LLC
120379	18876	U S ARMY AVIATION AND MISSILE COMMAND
120379	24617	GENERAL MOTORS CORP
10-20395	77820	AMPHENOL CORP
10113	87405	FACET (OKLAHOMA) LLC
393	07429	BLACK AND DECKER US INC
7744771	19207	U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
496D	36232	LINCOLN ELECTRIC HOLDINGS INC
FFW84CLASSASTYLE1	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
FC6783	82646	ALLIED PRODUCTS CORP LOADCRAFT DIV
56436	82983	AMF INC AMF YORK DIV
5310000120379	A00AM	E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
5310000120379	SCY13	E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
FIG2213-5-16	01292	ALLEN W D MFG CO
MS35337-26	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
V11-1-030	97403	CECOM LR CENTER

Techincal Specification:

MATERIAL	STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	FED STD 66,AISI C1060 THRU C1080 OR SAE 1060 THRU 1080 FED STD ALL MATERIAL RESPONSES OVERALL
SURFACE TREATMENT	CADMIUM OR
	ZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE OR
	QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE OVERALL
HARDNESS RATING	45.0 ROCKWELL C MINIMUM AND
	53.0 ROCKWELL C MAXIMUM
STYLE DESIGNATOR	SPLIT HELICAL-RIGHT HAND
HOLE DIAMETER	0.319 INCHES MINIMUM AND
	0.333 INCHES MAXIMUM
OUTSIDE DIAMETER	0.575 INCHES NOMINAL
MATERIAL THICKNESS	0.056 INCHES MINIMUM AND
	0.066 INCHES MAXIMUM
NONDEFINITIVE SPEC/STD DATA	1 STYLE AND
	A CLASS
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE	81348
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	FFW84CLASSASTYLE1
MANUFACTURERS CODE	96906
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	MS35337-26

Click here to Register for Free 30-day Trial