|
|
|
National Stock Number:
5310-00-012-0147
Federal Supply Class:
5310
National Item Identification Number:
000120147
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 583547 | 00088 | ROYAL OAK GAGE INC | | 583547 | 33615 | ENJET AERO MANCHESTER LLC | | 583547 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6350 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.192 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.428 INCHES MINIMUM AND | | 0.448 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.067 INCHES NOMINAL | | HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND | | 40.0 ROCKWELL C MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES TOP | | 63.0 MICROINCHES BOTTOM | | 90.0 MICROINCHES INNER | | 90.0 MICROINCHES OUTER | | SPECIAL FEATURES | TF30 AIRCRAFT | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 77445 | | DESIGN CONTROL REFERENCE | 583547 |
|
|