|
|
|
National Stock Number:
5310-00-011-5550
Federal Supply Class:
5310
National Item Identification Number:
000115550
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 0907863 | 92392 | ALLIS-CHALMERS CORP | | 0907863-5 | 6N299 | AGCO CORP PARTS OPN | | 115550 | 21450 | ARMY WEAPONS COMMAND ATTN AMSWE-REE-S | | 115550 | 24617 | GENERAL MOTORS CORP | | 115550 | 31007 | NAVISTAR INTL CORP | | 115550 | 7X677 | GENERAL MOTORS LLC | | 201505 | 06853 | BENDIX COMMERCIAL VEHICLE SYSTEMS LLC | | 6E07 | 12603 | CLARK EQUIPMENT CO | | X297B | 14351 | TELEDYNE CONTINENTAL MOTORS INDUSTRIAL PRODUCTS DIV TELEDYNE INDUSTRIES INC SUB OF TELEDYNE INC | | MILW6986TYPEA | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 907863 | 92392 | ALLIS-CHALMERS CORP |
|
Techincal Specification:
| HOLE DIAMETER | 0.448 INCHES MINIMUM AND 0.464 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM | | MATERIAL | | | NONDEFINITIVE SPEC/STD DATA | A TYPE | | OUTSIDE DIAMETER | 0.740 INCHES MINIMUM AND 0.789 INCHES MAXIMUM | | STYLE DESIGNATOR | FLAT INTERNAL TEETH |
|