|
|
|
National Stock Number:
5310-00-011-4614
Federal Supply Class:
5310
National Item Identification Number:
000114614
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 114614 | 12204 | DAIMLER CHRYSLER | | 114614 | 24617 | GENERAL MOTORS CORP | | 3F1147 | 11083 | CATERPILLAR INC | | 7416548 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 1234582 | 79500 | WESTINGHOUSE ELECTRIC CORP | | 114614 | 7X677 | GENERAL MOTORS LLC | | 761480 | 79500 | WESTINGHOUSE ELECTRIC CORP | | MILW6986TYPEC | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1060 OR | | STEEL COMP 1065 OR | | STEEL COMP 1070 OR | | STEEL COMP 1075 OR | | STEEL COMP 1080 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | -QQ-S-633 CANC FED SPEC ALL MATERIAL RESPONSES OVERALL | | STYLE DESIGNATOR | COUNTERSINK EXTERNAL TEETH | | HOLE DIAMETER | 0.195 INCHES MINIMUM AND | | 0.205 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.354 INCHES NOMINAL | | MATERIAL THICKNESS | 0.020 INCHES MINIMUM AND | | 0.025 INCHES MAXIMUM | | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND | | 82.0 DEGREES MAXIMUM | | NONDEFINITIVE SPEC/STD DATA | C TYPE | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81349 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MILW6986TYPEC |
|