|
|
|
National Stock Number:
5307-01-584-4777
Federal Supply Class:
5307
National Item Identification Number:
015844777
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 120-230-1J | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | 120-230-1J | 0K6Z0 | SATURN FASTENERS INC | | 120-230-1J | 17328 | UNITED PRECISION PRODUCTS CO., INC. | | 120-230-1J | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | 120-230-1J | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| OVERALL LENGTH | 1.562 INCHES NOMINAL | | MATERIAL | STEEL COMP 4340 | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES STUD THREAD | | PART NAME ASSIGNED BY CONTROLLING AGENCY | STUD STRAIGHT | | SPECIAL FEATURES | PART NUMBER 120-230-1J. "J" STATES STANDARD PITCH DIAMETER. | | THREAD QUANTITY PER INCH | 18 STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) NUT THREAD | | THREAD SERIES DESIGNATOR | UNJS STUD THREAD | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD CLASS | 3A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.688 INCHES MINIMUM NUT THREAD | | THREAD LENGTH | 0.719 INCHES MINIMUM STUD THREAD |
|