|
|
|
National Stock Number:
5307-01-546-7253
Federal Supply Class:
5307
National Item Identification Number:
015467253
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 120-163P32J | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| OVERALL LENGTH | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM | | SPECIAL FEATURES | STUD-STRAIGHT, 0.3750-16 X 0.375-24, 2.0 LONG, CAD PLATED, STANDARD PITCH DIAMETER. | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE2, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD CLASS | 3A NUT THREAD B | | THREAD DIRECTION | RIGHT-HAND NUT THREAD A | | THREAD DIRECTION | RIGHT-HAND NUT THREAD B | | THREAD LENGTH | 0.625 INCHES MINIMUM NUT THREAD B | | THREAD LENGTH | 0.938 INCHES MINIMUM NUT THREAD A | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) NUT THREAD B | | THREAD SERIES DESIGNATOR | UNJS NUT THREAD A |
|
|