|
|
|
National Stock Number:
5307-01-546-5871
Federal Supply Class:
5307
National Item Identification Number:
015465871
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 120-161P22N | 0K6Z0 | SATURN FASTENERS INC | | 120-161P22N | 0UCY9 | M.S. AEROSPACE INC. | | 120-161P22N | 17328 | UNITED PRECISION PRODUCTS CO., INC. | | 120-161P22N | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | 120-161P22N | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| OVERALL LENGTH | 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE 2, CLASS 2 FED SPEC 1ST TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD DIRECTION | RIGHT-HAND NUT THREAD A | | THREAD DIRECTION | RIGHT-HAND NUT THREAD B | | THREAD LENGTH | 0.789 INCHES MINIMUM AND 0.791 INCHES MAXIMUM NUT THREAD B | | THREAD LENGTH | 0.915 INCHES MINIMUM AND 0.917 INCHES MAXIMUM NUT THREAD A | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) NUT THREAD B | | THREAD SERIES DESIGNATOR | UNJS NUT THREAD A |
|
|