|
|
|
National Stock Number:
5307-01-239-9485
Federal Supply Class:
5307
National Item Identification Number:
012399485
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 16611115-001 | 28009 | SYPRIS ELECTRONICS, LLC |
|
Techincal Specification:
| NOMINAL THREAD SIZE | 0.164 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.164 INCHES STUD THREAD | | OVERALL LENGTH | 4.690 INCHES MINIMUM AND 4.710 INCHES MAXIMUM | | MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 | | SPECIAL FEATURES | DRILLED HOLE 0.830 IN. MIN,0.870 IN. MAX LG FROM NUT END; 0.063 IN. MIN 0.066 IN. MAX DIA | | THREAD CLASS | 2A NUT THREAD | | THREAD CLASS | 2A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.145 INCHES MINIMUM STUD THREAD AND 0.205 INCHES MAXIMUM STUD THREAD | | THREAD LENGTH | 0.470 INCHES MINIMUM NUT THREAD AND 0.530 INCHES MAXIMUM NUT THREAD | | THREAD QUANTITY PER INCH | 32 NUT THREAD | | THREAD QUANTITY PER INCH | 32 STUD THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|