| OVERALL LENGTH | 1.740 INCHES MINIMUM AND 1.780 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | C50TF13 CL-B,CAGEC FSCM 07482 MFR REF SINGLE MATERIAL RESPONSE |
| MATERIAL | NICKEL ALLOY 718 |
| NOMINAL THREAD SIZE | 0.3125 INCHES NUT THREAD |
| NOMINAL THREAD SIZE | 0.3125 INCHES STUD THREAD |
| NUT END SHANK DIAMETER | 0.319 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| NUT END SHANK LENGTH | 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.643 INCHES MINIMUM AND 0.647 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.052 INCHES MINIMUM AND 0.057 INCHES MAXIMUM |
| SPECIAL FEATURES | HEX DRIVE HOLE AT STUD END,0.156 TO 0.158 IN. DISTANCE ACROSS FLATS,0.140 TO 0.160 IN. DP; SHOULDER OFF-CENTER FROM STUD HORIZ CL 0.040 IN. |
| STUD END SHANK DIAMETER | 0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
| STUD END SHANK LENGTH | 0.075 INCHES MINIMUM AND 0.095 INCHES MAXIMUM |
| STYLE DESIGNATOR | SHOULDERED |
| SURFACE FINISH | 32.0 MICROINCHES NUT THD |
| SURFACE FINISH | 32.0 MICROINCHES STUD THD |
| THREAD DIRECTION | RIGHT-HAND NUT THREAD |
| THREAD DIRECTION | RIGHT-HAND STUD THREAD |
| THREAD CLASS | 3A NUT THREAD |
| THREAD CLASS | 3A STUD THREAD |
| THREAD LENGTH | 0.685 INCHES MINIMUM AND 0.725 INCHES MAXIMUM STUD THREAD |
| THREAD LENGTH | 0.900 INCHES MINIMUM AND 0.930 INCHES MAXIMUM NUT THREAD |
| THREAD QUANTITY PER INCH | 24 NUT THREAD |
| THREAD QUANTITY PER INCH | 24 STUD THREAD |
| THREAD SERIES DESIGNATOR | UNJF NUT THREAD |
| THREAD SERIES DESIGNATOR | UNJF STUD THREAD |