|
|
|
National Stock Number:
5307-00-174-8501
Federal Supply Class:
5307
National Item Identification Number:
001748501
Description:
STUD,SHOULDERED
Detail:
A HEADLESS FASTENER NOT EXCEEDING 12 INCHES (304.8 MM) IN LENGTH, THREADED EXTERNALLY ON BOTH ENDS WITH THREADS OF THE SAME NOMINAL DIAMETER. ALL OR PART OF THE UNTHREADED SECTION HAS A CROSS-SECTIONAL DIAMETER GREATER THAN THE NOMINAL STUD SIZE PLUS 0.020 INCHES (0.508 MM). IT MAY BE THREAD RELIEVED. SEE ALSO STUD, LOCKED IN.
|
Manufacturer Information:
| 4027T42P01 | 99207 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| MATERIAL | NICKEL ALLOY | | MATERIAL DOCUMENT AND CLASSIFICATION | C50TF25 CL A,FSCM 24446 MFR REF SINGLE MATERIAL RESPONSE | | STYLE DESIGNATOR | SHOULDERED | | SHOULDER DIAMETER | 0.480 INCHES MINIMUM AND | | 0.485 INCHES MAXIMUM | | SHOULDER LENGTH | 0.070 INCHES MINIMUM AND | | 0.080 INCHES MAXIMUM | | NUT END SHANK LENGTH | 0.130 INCHES MINIMUM AND | | 0.150 INCHES MAXIMUM | | DISTANCE ACROSS FLATS | 0.330 INCHES MINIMUM AND | | 0.340 INCHES MAXIMUM | | STUD END SHANK LENGTH | 0.135 INCHES NOMINAL | | STUD END SHANK DIAMETER | 0.190 INCHES NOMINAL | | NUT END SHANK DIAMETER | 0.190 INCHES NOMINAL | | OVERALL LENGTH | 1.020 INCHES MINIMUM AND | | 1.120 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF NUT THREAD | | UNJF STUD THREAD | | NOMINAL THREAD SIZE | 0.190 INCHES NUT THREAD | | 0.190 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | 3A STUD THREAD | | THREAD QUANTITY PER INCH | 32 NUT THREAD | | 32 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.365 INCHES MINIMUM AND | | 0.385 INCHES MAXIMUM NUT THREAD | | 0.335 INCHES MINIMUM AND | | 0.355 INCHES MAXIMUM STUD THREAD | | TEST DATA DOCUMENT | 99207-P3TF2 CL A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | CRITICALITY CODE JUSTIFICATION | CTDT | | SURFACE FINISH | 63.0 MICROINCHES NUT THD | | 32.0 MICROINCHES SHANK | | 63.0 MICROINCHES STUD THD | | 63.0 MICROINCHES WRENCHING FACILITY |
|
|