|
|
|
National Stock Number:
5307-00-168-9346
Federal Supply Class:
5307
National Item Identification Number:
001689346
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 565377P6 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL CORROSION RESISTING | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5625 ASSN STD SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | NICKEL AND | | CADMIUM OVERALL | | OVERALL LENGTH | 1.302 INCHES MINIMUM AND | | 1.322 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | 0.250 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | 3A STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | 20 STUD THREAD | | THREAD PITCH DIAMETERS | 0.2278 TO 0.2293 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.500 INCHES MINIMUM NUT THREAD | | 0.688 INCHES MINIMUM STUD THREAD | | SURFACE FINISH | 32.0 MICROINCHES STUD THD | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 77445 | | DESIGN CONTROL REFERENCE | 565377P6 |
|
|