|
|
|
National Stock Number:
5307-00-166-3214
Federal Supply Class:
5307
National Item Identification Number:
001663214
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 17746P003 | 70188 | FRANKLIN ENGINE CO INC | | 17746P3 | 70188 | FRANKLIN ENGINE CO INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8740 OR | | STEEL COMP 8735 | | SURFACE TREATMENT | CADMIUM OVERALL | | OVERALL LENGTH | 1.484 INCHES MINIMUM AND | | 1.531 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | 0.375 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 16 STUD THREAD | | THREAD PITCH DIAMETERS | 0.3444 TO 0.3459 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.625 INCHES MINIMUM NUT THREAD | | 0.625 INCHES MINIMUM STUD THREAD | | SPECIAL FEATURES | STUD END THREAD 0.003 IN. OVERSIZE | | HARDNESS RATING | 25.0 ROCKWELL C MINIMUM AND | | 33.0 ROCKWELL C MAXIMUM |
|
|