|
|
|
National Stock Number:
5307-00-145-3204
Federal Supply Class:
5307
National Item Identification Number:
001453204
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 18491P12 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8735 | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6320 ASSN STD SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OVERALL | | OVERALL LENGTH | 2.094 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | 0.312 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 18 STUD THREAD | | THREAD PITCH DIAMETERS | 0.2933 TO 0.2959 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.500 INCHES MINIMUM NUT THREAD | | 0.875 INCHES MINIMUM STUD THREAD | | SPECIAL FEATURES | STUD END THREAD 0.012 IN. OVERSIZE | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM |
|
|