|
|
|
National Stock Number:
5307-00-145-3194
Federal Supply Class:
5307
National Item Identification Number:
001453194
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 16032P4 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8740 | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OVERALL | | OVERALL LENGTH | 2.062 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | 0.375 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 16 STUD THREAD | | THREAD PITCH DIAMETERS | 0.3427 TO 0.3451 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.875 INCHES MINIMUM NUT THREAD | | 0.750 INCHES MINIMUM STUD THREAD | | SPECIAL FEATURES | STUD END THREAD 0.004 IN. OVERSIZE | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM |
|
|