|
|
|
National Stock Number:
5307-00-019-1991
Federal Supply Class:
5307
National Item Identification Number:
000191991
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 191991 | 21450 | ARMY WEAPONS COMMAND ATTN AMSWE-REE-S | | 191991 | 24617 | GENERAL MOTORS CORP |
|
Techincal Specification:
| MATERIAL | STEEL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OR | | ZINC OVERALL | | OVERALL LENGTH | 1.625 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | 0.312 INCHES STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 18 STUD THREAD | | THREAD PITCH DIAMETERS | 0.2780 TO 0.2800 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.562 INCHES MINIMUM NUT THREAD | | 0.417 INCHES MINIMUM STUD THREAD | | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY NUT END THREAD CLASS,AND,AS MODIFIED BY STUD END THREAD PITCH DIAMETERS | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 21450 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | 191991 |
|
|