|
|
|
National Stock Number:
5307-00-011-1318
Federal Supply Class:
5307
National Item Identification Number:
000111318
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 111318 | 21450 | ARMY WEAPONS COMMAND ATTN AMSWE-REE-S | | 111318 | 24617 | GENERAL MOTORS CORP | | 114987 | 12204 | DAIMLER CHRYSLER | | 54012 | 34623 | AM GENERAL LLC | | 114987 | 81996 | U S ARMY AVIATION AND MISSILE COMMAND | | 5307000111318 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 8805757 | 23040 | FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES | | 88057S7 | 23040 | FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES | | 632159 | 24617 | GENERAL MOTORS CORP | | 632159 | 34623 | AM GENERAL LLC | | GM111318 | 34623 | AM GENERAL LLC | | 88057S7 | 57526 | FORD MOTOR COMPANY | | 91196 | 71995 | DRESSER INDUSTRIES INC WAUKESHA ENGINE DIV |
|
Techincal Specification:
| MATERIAL | STEEL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 1.688 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | 0.375 INCHES STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 16 STUD THREAD | | THREAD PITCH DIAMETERS | 0.3360 TO 0.3380 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.625 INCHES MINIMUM NUT THREAD | | 0.469 INCHES MINIMUM STUD THREAD | | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY NUT THREAD CLASS.AND,AS MODIFIED BY STUD END THREAD PITCH DIAMETERS | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 21450 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | 111318 |
|