5306-01-336-6306, BOLT,EXTERNALLY RELIEVED BODY

5306-01-336-6305 BOLT,EXTERNALLY RELIEVED BODY

National Stock Number:
5306-01-336-6306

Federal Supply Class:
5306

National Item Identification Number:
013366306

Description:
BOLT,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). It is No. 10 (0.190 IN.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, INTERNAL WRENCHING and THUMBSCREW. See also SCREW, EXTERNALLY RELIEVED BODY.

Manufacturer Information:

5306-001CR7-1450	S7549	AEROSPACE INDUSTRIAL DEVELOPMENT CORPORATION
AIC4356CR7-1450	06725	SPS TECHNOLOGIES, LLC
VCB0051C7-1-450	06710	VALLEY-TODECO, INC.
PBF4356CR7-1450	27624	SPS TECHNOLOGIES LLC
SII 1058CR7-1450	57928	SONIC INDUSTRIES, INC.
VS2986CR7-1450	92215	HOWMET GLOBAL FASTENING SYSTEMS INC

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	1.450 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	1.870 INCHES MINIMUM AND 1.890 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.436 INCHES MINIMUM AND 0.437 INCHES MAXIMUM
HARDNESS RATING	46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.194 INCHES MINIMUM AND 0.204 INCHES MAXIMUM
HEAD STYLE	HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.3750 INCHES
SPECIAL FEATURES	LUBRICATION DRY FILM LUBE PER MIL-L-46010,GRIP ONLY
THREAD QUANTITY PER INCH	24
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
WIDTH BETWEEN FLATS	0.553 INCHES MINIMUM AND 0.563 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	NAS 672 NATIONAL SPEC SINGLE TREATMENT RESPONSE HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	NAS 672 NATIONAL SPEC SINGLE TREATMENT RESPONSE THREADS
SURFACE TREATMENT	CADMIUM HEAD
SURFACE TREATMENT	CADMIUM THREADS
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.3750 INCHES NOMINAL

Click here to Register for Free 30-day Trial