5905-01-315-7084 RESISTOR,FIXED,WIRE WOUND,NONIND Index 5306-01-315-7086 BOLT,SHOULDER

National Stock Number:
5306-01-315-7085

Federal Supply Class:
5306

National Item Identification Number:
013157085

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.


Manufacturer Information:
407176652661RTX CORPORATION
407176677445RTX CORPORATION
5306PL14991639009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH


Techincal Specification:
EXTENDED WASHER DIAMETER0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM
EXTENDED WASHER THICKNESS0.060 INCHES MINIMUM
FASTENER LENGTH0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
GRIP LENGTH0.125 INCHES MINIMUM AND 0.223 INCHES MAXIMUM
HEAD HEIGHT0.293 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
HEAD STYLEDOUBLE HEXAGON W/HOLE
HOLE CONFIGURATION STYLEDOUBLE HEXAGON LONGITUDINAL HOLE
HOLE DIAMETER0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM
HOLE QUANTITY4
HOLE TYPEDRILLED
MATERIAL DOCUMENT AND CLASSIFICATIONPWA 96 CAGEC 77445 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MATERIALNICKEL ALLOY OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES
SPECIAL FEATURESHEAT TREATED PER PWA 36545-3 CAGEC 77445 ON POINT AND BEARING SURFACES OF HEAD
WIDTH BETWEEN FLATS0.312 INCHES NOMINAL
SURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH32.0 MICROINCHES GRIP
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.392 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
THREAD QUANTITY PER INCH28
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF)


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us