|
|
|
National Stock Number:
5306-01-240-4028
Federal Supply Class:
5306
National Item Identification Number:
012404028
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 120978-3-12 | 80539 | SPS TECHNOLOGIES, LLC | | 5306PL1498563 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | AIC596-3-12 | 06725 | SPS TECHNOLOGIES, LLC | | C7521-3-12 | 27624 | SPS TECHNOLOGIES LLC | | C7521-3-12 | 56878 | SPS TECHNOLOGIES, LLC | | 5306PL1803011 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | VCG0009-3-12 | 06710 | VALLEY-TODECO, INC. | | VS3133-3-12 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | H411-3-12 | 17446 | HUCK INTERNATIONAL, INC | | C7521-3-12 | 81755 | LOCKHEED MARTIN CORPORATION | | C7521-3-12 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | VS3133-3-12 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | H411-3-12 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| FASTENER LENGTH | 1.058 INCHES MINIMUM AND 1.088 INCHES MAXIMUM | | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM | | GRIP LENGTH | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM | | HEAD HEIGHT | 0.140 INCHES NOMINAL | | HEAD MINOR DIAMETER | 0.383 INCHES MINIMUM AND 0.389 INCHES MAXIMUM | | HEAD STYLE | SPLINE DRIVE SHEAR HEAD | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP H11 OVERALL | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE FINISH | 32.0 MICROINCHES THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.298 INCHES MINIMUM AND 0.348 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 32 |
|
|