5306-01-235-1677 BOLT,SHOULDER Index 5306-01-235-1679 BOLT,SHOULDER

National Stock Number:
5306-01-235-1678

Federal Supply Class:
5306

National Item Identification Number:
012351678

Description:
BOLT,SHOULDER

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 10 (0.190 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 10 (0.190 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW.


Manufacturer Information:
74328-4D15Y56878SPS TECHNOLOGIES, LLC
74328-4S15Y56878SPS TECHNOLOGIES, LLC
MB87-4D1573197HI-SHEAR CORPORATION
MB87-4D15L4528LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC
ST3M607-4D1506710VALLEY-TODECO, INC.
ST3M607-4D1517446HUCK INTERNATIONAL, INC
ST3M607-4D1557928SONIC INDUSTRIES, INC.
ST3M607-4D1576301THE BOEING COMPANY
VS3061-4D1592215HOWMET GLOBAL FASTENING SYSTEMS INC


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER1.282 INCHES MINIMUM AND 1.322 INCHES MAXIMUM FIRST HOLE
EXTENDED WASHER THICKNESS0.059 INCHES MINIMUM AND 0.079 INCHES MAXIMUM
EXTENDED WASHER DIAMETER0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
FASTENER LENGTH1.474 INCHES MINIMUM AND 1.504 INCHES MAXIMUM
HEAD HEIGHT0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
HEAD STYLEDOUBLE HEXAGON W/HOLE
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP XM-13 OVERALL
MINIMUM TENSILE STRENGTH220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER0.2802 INCHES MINIMUM AND 0.2807 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPEROUND FIRST SHOULDER
SHOULDER LENGTH0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM FIRST SHOULDER
WIDTH BETWEEN FLATS0.304 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS3A
THREAD LENGTH0.526 INCHES MINIMUM AND 0.576 INCHES MAXIMUM
THREAD QUANTITY PER INCH28
THREAD SERIES DESIGNATORUNJF


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us