5306-01-109-0740 BOLT,EYE Index 4710-01-109-0742 TUBE,BENT,METALLIC

National Stock Number:
5306-01-109-0741

Federal Supply Class:
5306

National Item Identification Number:
011090741

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
BM331512-2217446HUCK INTERNATIONAL, INC
BM331512-2297928HUCK INTL INC
GB511GF12-2206710VALLEY-TODECO, INC.
GB511GF12-2206725SPS TECHNOLOGIES, LLC
GB511GF12-2226512NORTHROP GRUMMAN SYSTEMS CORPORATION
GB511GF12-2227624SPS TECHNOLOGIES LLC
GB511W12-2226512NORTHROP GRUMMAN SYSTEMS CORPORATION
LWB22D12-2256878SPS TECHNOLOGIES, LLC
GB511GF12-2256878SPS TECHNOLOGIES, LLC
LWB22D12-2280539SPS TECHNOLOGIES, LLC


Techincal Specification:
EXTENDED WASHER DIAMETER2.303 INCHES MINIMUM AND 2.303 INCHES MINIMUM AND 2.313 INCHES MAXIMUM2.313 INCHES MAXIMUM
EXTENDED WASHER THICKNESS0.264 INCHES MINIMUM AND 0.264 INCHES MINIMUM AND 0.284 INCHES MAXIMUM0.284 INCHES MAXIMUM
FASTENER LENGTH3.180 INCHES MINIMUM AND 3.180 INCHES MINIMUM AND 3.200 INCHES MAXIMUM3.200 INCHES MAXIMUM
GRIP DIAMETER1.3725 INCHES MINIMUM AND 1.3725 INCHES MINIMUM AND 1.3740 INCHES MAXIMUM1.3740 INCHES MAXIMUM
GRIP LENGTH1.365 INCHES MINIMUM AND 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM1.385 INCHES MAXIMUM
HARDNESS RATING46.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL50.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT1.256 INCHES MINIMUM AND 1.256 INCHES MINIMUM AND 1.276 INCHES MAXIMUM1.276 INCHES MAXIMUM
HEAD STYLEDOUBLE HEXAGON W/HOLEDOUBLE HEXAGON W/HOLE
MATERIAL DOCUMENT AND CLASSIFICATIONAMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALLAMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP H11 OVERALLSTEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH220000 POUNDS PER SQUARE INCH220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER1.375 INCHES1.375 INCHES
SINGLE SHEAR STRENGTH132000 POUNDS PER SQUARE INCH (PSI)132000 POUNDS PER SQUARE INCH (PSI)
THREAD QUANTITY PER INCH1212
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF)UNIFIED NATIONAL JOINT FINE (UNJF)
WIDTH BETWEEN FLATS1.427 INCHES MINIMUM AND 1.427 INCHES MINIMUM AND 1.440 INCHES MAXIMUM1.440 INCHES MAXIMUM
SURFACE TREATMENTCADMIUM OVERALLCADMIUM OVERALL
THREAD CLASS3A3A
THREAD DIRECTIONRIGHT-HANDRIGHT-HAND
THREAD LENGTH1.805 INCHES MINIMUM AND 1.805 INCHES MINIMUM AND 1.825 INCHES MAXIMUM1.825 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us