5305-01-107-6102 SCREW,MACHINE Index 5910-01-107-6104 CAPACITOR,FIXED,CERAMIC DIELECTR

National Stock Number:
5306-01-107-6103

Federal Supply Class:
5306

National Item Identification Number:
011076103

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
NAS464P10L4280205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER2.921 INCHES MINIMUM AND 2.921 INCHES MINIMUM AND 2.953 INCHES MAXIMUM FIRST HOLE2.953 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH3.172 INCHES MINIMUM AND 3.172 INCHES MINIMUM AND 3.219 INCHES MAXIMUM3.219 INCHES MAXIMUM
GRIP DIAMETER0.6230 INCHES MINIMUM AND 0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM0.6240 INCHES MAXIMUM
GRIP LENGTH2.625 INCHES NOMINAL2.625 INCHES NOMINAL
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL40.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.312 INCHES NOMINAL0.312 INCHES NOMINAL
HEAD STYLEHEXAGONHEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OR MIL-S-8695 MIL SPEC 6TH MATERIAL RESPONSE OVERALLMIL-S-8695 MIL SPEC 6TH MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 4140 OR STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8735 OR STEEL COMP 8740 OR STEEL COMP 8740 OR STEEL COMP 4037 OVERALLSTEEL COMP 4037 OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.625 INCHES0.625 INCHES
SHANK UNTHREADED HOLE DIAMETER0.141 INCHES NOMINAL FIRST HOLE0.141 INCHES NOMINAL FIRST HOLE
SINGLE SHEAR STRENGTH29150 POUNDS PER SQUARE INCH (PSI)29150 POUNDS PER SQUARE INCH (PSI)
WIDTH BETWEEN FLATS0.938 INCHES NOMINAL0.938 INCHES NOMINAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALLQQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALLCADMIUM OVERALL
THREAD CLASS3A3A
THREAD DIRECTIONRIGHT-HANDRIGHT-HAND
THREAD LENGTH0.563 INCHES NOMINAL0.563 INCHES NOMINAL
THREAD QUANTITY PER INCH1818
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF)UNIFIED NATIONAL JOINT FINE (UNJF)


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us