5305-01-075-8900 SCREW,MACHINE Index 5305-01-075-8902 SCREW,SHOULDER

National Stock Number:
5306-01-075-8901

Federal Supply Class:
5306

National Item Identification Number:
010758901

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
10115707A486GNIMIKKEISTOKESKUS NCB FINLAND
BACB30NE5-1081205THE BOEING COMPANY
NAS6605-1080205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
NAS6605-1092802B/E AEROSPACE INC


Techincal Specification:
FASTENER LENGTH1.094 INCHES NOMINAL1.094 INCHES NOMINAL
GRIP DIAMETER0.3110 INCHES MINIMUM AND 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM0.3120 INCHES MAXIMUM
GRIP LENGTH0.625 INCHES NOMINAL0.625 INCHES NOMINAL
HEAD HEIGHT0.156 INCHES MINIMUM AND 0.156 INCHES MINIMUM AND 0.172 INCHES MAXIMUM0.172 INCHES MAXIMUM
HEAD STYLEDISHED HEXAGONDISHED HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALLMIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 4340 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALLSTEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.312 INCHES0.312 INCHES
SINGLE SHEAR STRENGTH95000 POUNDS PER SQUARE INCH (PSI)95000 POUNDS PER SQUARE INCH (PSI)
WIDTH BETWEEN FLATS0.492 INCHES MINIMUM AND 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM0.502 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA80205-NAS6605 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD80205-NAS6605 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALLQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALLCADMIUM OVERALL
THREAD CLASS3A3A
THREAD DIRECTIONRIGHT-HANDRIGHT-HAND
THREAD LENGTH0.469 INCHES NOMINAL0.469 INCHES NOMINAL
THREAD QUANTITY PER INCH2424
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF)UNIFIED NATIONAL JOINT FINE (UNJF)


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us