5965-00-584-4593 LOUDSPEAKER,PERMANENT MAGNET Index 4310-00-584-4597 COMPRESSOR UNIT,RECIPROCATING

National Stock Number:
5306-00-584-4595

Federal Supply Class:
5306

National Item Identification Number:
005844595

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.


Manufacturer Information:
MS20074-04-3796906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
FASTENER LENGTH3.890 INCHES MINIMUM AND 3.937 INCHES MAXIMUM
FEATURES PROVIDEDFINISHED HEAD
GRIP LENGTH3.359 INCHES MINIMUM AND 3.391 INCHES MAXIMUM
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.203 INCHES MINIMUM AND 0.234 INCHES MAXIMUM
HEAD STYLEDISHED HEXAGON
HOLE CONFIGURATION STYLEHEXAGON LONGITUDINAL HOLE
HOLE DIAMETER0.070 INCHES NOMINAL
HOLE QUANTITY6
HOLE TYPEDRILLED
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-8695 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL OVERALL
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.250 INCHES
WIDTH BETWEEN FLATS0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.499 INCHES MINIMUM AND 0.530 INCHES MAXIMUM
THREAD QUANTITY PER INCH20
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us