|
|
|
National Stock Number:
5306-00-177-5547
Federal Supply Class:
5306
National Item Identification Number:
001775547
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| AN175C26A | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.500 INCHES MINIMUM AND | | 0.579 INCHES MAXIMUM | | FASTENER LENGTH | 2.828 INCHES MINIMUM AND | | 2.875 INCHES MAXIMUM | | MATERIAL | STEEL COMP 431 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | HEAD STYLE | HEXAGON | | HEAD HEIGHT | 0.172 INCHES MINIMUM AND | | 0.204 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.490 INCHES MINIMUM AND | | 0.502 INCHES MAXIMUM | | GRIP LENGTH | 2.296 INCHES MINIMUM AND | | 2.328 INCHES MAXIMUM | | GRIP DIAMETER | 0.3112 INCHES MINIMUM AND | | 0.3117 INCHES MAXIMUM | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 88044 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | AN175C26A |
|
|