| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.734 INCHES MINIMUM AND 2.766 INCHES MAXIMUM FIRST HOLE |
| FASTENER LENGTH | 2.922 INCHES MINIMUM AND 2.953 INCHES MAXIMUM |
| GROOVE DIAMETER | 0.655 INCHES MINIMUM AND 0.665 INCHES MAXIMUM |
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD DIAMETER | 1.297 INCHES MINIMUM AND 1.328 INCHES MAXIMUM |
| HEAD HEIGHT | 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM |
| HEAD STYLE | BUTTON |
| INTERNAL DRIVE STYLE | SLOT |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL |
| MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.750 INCHES |
| SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE |
| SINGLE SHEAR STRENGTH | 33150 POUNDS PER SQUARE INCH |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 3A |
| THREAD LENGTH | 0.422 INCHES MINIMUM AND 0.516 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 16 |
| THREAD SERIES DESIGNATOR | UNF |