| CHAMFER ANGLE | 30.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM |
| FASTENER LENGTH | 2.50 INCHES NOMINAL |
| HEAD DIAMETER | 0.457 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| HEAD HEIGHT | 0.306 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| HEAD STYLE | FLAT CHAMFER |
| INTERNAL DRIVE STYLE | HEXAGON |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM F468 AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) SINGLE MATERIAL RESPONSE OR QQ-N-281,CL A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | NICKEL ALLOY 400 OVERALL |
| MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| MINIMUM YIELD STRENGTH | 40000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.3125 INCHES |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SOCKET HEAD CAP SCREW;STUDS,BOLTS,SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED; GENERAL SPECIFICATION FOR |
| THREAD QUANTITY PER INCH | 18 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| WIDTH ACROSS FLATS | 0.250 INCHES NOMINAL |
| SPECIFICATION/STANDARD DATA | 81349-MIL-DTL-1222J GOVERNMENT SPECIFICATION |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.875 INCHES MINIMUM |