| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.018 INCHES NOMINAL ALL HOLES |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| FASTENER LENGTH | 1.126 INCHES MINIMUM AND 1.156 INCHES MAXIMUM |
| GRIP DIAMETER | 0.498 INCHES MINIMUM AND 0.499 INCHES MAXIMUM |
| GRIP LENGTH | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM |
| HEAD HEIGHT | 0.193 INCHES MAXIMUM |
| HEAD DIAMETER | 0.959 INCHES MINIMUM |
| HEAD STYLE | FLAT COUNTERSUNK |
| INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | IRON ALLOY 660 OVERALL |
| MINIMUM TENSILE STRENGTH | 17460 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.500 INCHES |
| SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM ALL HOLES |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW MACHINE FLAT 100 DEG HEAD CLOSE TOLERANCE SHORT THREAD OFFSET CRUCFORM 160 KSI |
| POINT STYLE | FLAT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 TYPE II OR VIII FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.453 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 20 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |