|
|
|
National Stock Number:
5305-01-246-9615
Federal Supply Class:
5305
National Item Identification Number:
012469615
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| 965861-2C | 82577 | RAYTHEON COMPANY | | CS3007HS-06-2-1 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | RHNS7900-6-A-2 | 0HDW7 | HUCK INTERNATIONAL, INC. | | FT1314-2 | 58794 | FASTENER TECHNOLOGY CORP | | RHNS7900-6-A-2 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.138 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.193 INCHES MINIMUM AND | | 0.213 INCHES MAXIMUM | | FASTENER LENGTH | 0.650 INCHES MINIMUM AND | | 0.680 INCHES MAXIMUM | | MATERIAL | STEEL COMP 302 SPRING | | STEEL COMP 304 STAND-OFF | | IRON ALLOY 660 FASTENER | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A580 ASSN STD SINGLE MATERIAL RESPONSE SPRING | | MIL-S-23195 MIL SPEC SINGLE MATERIAL RESPONSE STAND-OFF | | AMS5732 ASSN STD SINGLE MATERIAL RESPONSE FASTENER | | SURFACE TREATMENT | PASSIVATE SPRING | | PASSIVATE STAND-OFF | | PASSIVATE FASTENER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING | | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF | | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | HEAD STYLE | FLAT CHAMFER | | HEAD DIAMETER | 0.218 INCHES MINIMUM AND | | 0.226 INCHES MAXIMUM | | HEAD HEIGHT | 0.134 INCHES MINIMUM AND | | 0.138 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | HEXAGON | | WIDTH ACROSS FLATS | 0.109 INCHES MINIMUM AND | | 0.111 INCHES MAXIMUM | | MATERIAL ACCOMMODATED THICKNESS | 0.031 INCHES MINIMUM AND | | 0.062 INCHES MAXIMUM |
|
|