5305-01-240-7396, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-240-7396

Federal Supply Class:
5305

National Item Identification Number:
012407396

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

11881C4-19A	59563	REID PRODUCTS INC.
3M925C4-19A	76301	THE BOEING COMPANY
642AS1631-7	30003	NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER
HT4067-4-19A	80539	SPS TECHNOLOGIES, LLC

Techincal Specification:

COUNTERSINK ANGLE	100.0 DEGREES NOMINAL
FASTENER LENGTH	1.641 INCHES MINIMUM AND 1.671 INCHES MAXIMUM
GRIP DIAMETER	0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH	1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM
HEAD DIAMETER	0.501 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD HEIGHT	0.071 INCHES MINIMUM AND 0.073 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE	HIGH-TORQUE
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT
MATERIAL	STEEL COMP XM-13 OVERALL
NOMINAL THREAD DIAMETER	0.250 INCHES
SPECIAL FEATURES	FURNISHED WITH RUBBER O-RING
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-83488 TY 2 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	ALUMINUM AND CHROMATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.443 INCHES MINIMUM AND 0.493 INCHES MAXIMUM
THREAD QUANTITY PER INCH	28
THREAD SERIES DESIGNATOR	UNJF

Click here to Register for Free 30-day Trial