5305-01-239-3498, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-01-239-3498

Federal Supply Class:
5305

National Item Identification Number:
012393498

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

200AS132-832-15	06540	NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV
200AS132-832-15	30003	NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER
200AS132-832-15	3B150	RAYTHEON COMPANY
200AS132-832-15	49956	RAYTHEON COMPANY
200AS132-832-15	54X10	RAYTHEON COMPANY

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.632 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	0.907 INCHES MINIMUM AND 0.969 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD DIAMETER	0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
HEAD HEIGHT	0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
HEAD STYLE	KNURLED NO. 1
INTERNAL DRIVE STYLE	SLOT
MATERIAL	STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL
NOMINAL THREAD DIAMETER	0.164 INCHES
POINT LENGTH	0.094 INCHES NOMINAL
POINT STYLE	CONE
POINT CHAMFER ANGLE	90.0 DEGREES NOMINAL
POINT DIAMETER	0.104 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.212 INCHES NOMINAL
THREAD CLASS	2A
THREAD SERIES DESIGNATOR	UNC
THREAD QUANTITY PER INCH	32

Click here to Register for Free 30-day Trial