|
|
|
National Stock Number:
5305-01-237-6759
Federal Supply Class:
5305
National Item Identification Number:
012376759
Description:
SCREW,SHOULDER
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 IN.) (1.5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is designed to be driven with either a wrench or an inserted driver or both in sizes below No. 10 (0.190 IN.) (5 mm) nominal diameter. No. 10 (0.190 IN.) (5 mm) and larger sizes must be designed for any type of inserted driver, but may also provide for external wrenching of the head. A locking feature may be incorporated in the design of the head or threads. For items which are both shouldered and have an externally relieved body, use SCREW, EXTERNALLY RELIEVED BODY. For items with a No. 10 (0.190 IN.) (5 mm) or larger thread diameter without an inserted driver head, use BOLT, SHOULDER. Excludes BOLT, INTERNAL WRENCHING and SCREW, CAP, SOCKET HEAD.
|
Manufacturer Information:
| 652-1730-001 | 13499 | ROCKWELL COLLINS, INC. |
|
Techincal Specification:
| COUNTERSINK ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM | | FASTENER LENGTH | 1.728 INCHES MINIMUM AND 1.758 INCHES MAXIMUM | | HEAD DIAMETER | 0.235 INCHES MINIMUM AND 0.255 INCHES MAXIMUM | | HEAD HEIGHT | 0.132 INCHES MINIMUM AND 0.156 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE FASTENER | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER | | MATERIAL | STEEL COMP 304 PRIMARY WASHER | | MATERIAL | STEEL COMP 430 OR STEEL COMP 305 FASTENER | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | SPECIAL FEATURES | FURNISH WITH ONE FLAT WASHER 0.022 IN. MIN AND 0.028 IN. MAX THICKNESS AND 0.164 IN. INSIDE DIA AND 0.267 IN. OUTSIDE DIA | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2A | | THREAD LENGTH | 0.269 INCHES MINIMUM AND 0.305 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNC |
|
|