5305-01-236-7086, SCREW,EXTERNALLY RELIEVED BODY

5305-01-236-7085 SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-01-236-7086

Federal Supply Class:
5305

National Item Identification Number:
012367086

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

16611344-001

28009

SYPRIS ELECTRONICS, LLC

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.159 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	0.250 INCHES NOMINAL
FIRST DIAMETER FROM HEAD	0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
HEAD DIAMETER	0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM
HEAD HEIGHT	0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
HEAD STYLE	PAN
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MINIMUM TENSILE STRENGTH	80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.086 INCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	00-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.086 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
THREAD QUANTITY PER INCH	56
THREAD SERIES DESIGNATOR	UNC

Click here to Register for Free 30-day Trial