|
|
|
National Stock Number:
5305-01-236-6192
Federal Supply Class:
5305
National Item Identification Number:
012366192
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 121754-7-19 | 56878 | SPS TECHNOLOGIES, LLC | | 121754-7-19 | 80539 | SPS TECHNOLOGIES, LLC | | 5305PL0783994 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 5305PL1631671 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 5305PL1631674 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | AIC9535-7-19 | 06725 | SPS TECHNOLOGIES, LLC | | C9535-7-19 | 81755 | LOCKHEED MARTIN CORPORATION | | PBF1198-7-19 | 27624 | SPS TECHNOLOGIES LLC | | VT1696-7-19 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | VT1696-7-19 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 1.856 INCHES MINIMUM AND 1.886 INCHES MAXIMUM | | GRIP DIAMETER | 0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM | | GRIP LENGTH | 1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM | | HEAD DIAMETER | 0.605 INCHES MINIMUM AND 0.625 INCHES MAXIMUM | | HEAD HEIGHT | 0.112 INCHES MINIMUM AND 0.125 INCHES MAXIMUM | | HEAD STYLE | FILLISTER COUNTERSUNK | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP H11 OVERALL | | NOMINAL THREAD DIAMETER | 0.437 INCHES | | SPECIAL FEATURES | TOP OF HEAD IS FLAT | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE FINISH | 32.0 MICROINCHES THREADS | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.658 INCHES MINIMUM AND 0.708 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 20 | | THREAD SERIES DESIGNATOR | UNJF |
|
|