5305-01-225-2612, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-225-2612

Federal Supply Class:
5305

National Item Identification Number:
012252612

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

NAS1581C6T11

80205

NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

THREAD SERIES DESIGNATOR	UNJF
NOMINAL THREAD DIAMETER	0.375 INCHES
THREAD QUANTITY PER INCH	24
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.569 INCHES MINIMUM AND
	0.619 INCHES MAXIMUM
FASTENER LENGTH	1.267 INCHES MINIMUM AND
	1.297 INCHES MAXIMUM
MATERIAL	IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OR
	AMS5732 ASSN STD SINGLE MATERIAL RESPONSE OR
	AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND
	40.0 ROCKWELL C MAXIMUM OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
HEAD STYLE	FLAT COUNTERSUNK
HEAD DIAMETER	0.5149 INCHES MINIMUM AND
	0.5662 INCHES MAXIMUM
COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND
	100.0 DEGREES MAXIMUM
INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)
GRIP LENGTH	0.678 INCHES MINIMUM AND
	0.698 INCHES MAXIMUM
GRIP DIAMETER	0.3735 INCHES MINIMUM AND
	0.3745 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES GRIP
	32.0 MICROINCHES THREADS
SPECIFICATION/STANDARD DATA	80205-NAS1581 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

Click here to Register for Free 30-day Trial