5305-01-083-7170, SCREW,SHOULDER

National Stock Number:
5305-01-083-7170

Federal Supply Class:
5305

National Item Identification Number:
010837170

Description:
SCREW,SHOULDER

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 IN.) (1.5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is designed to be driven with either a wrench or an inserted driver or both in sizes below No. 10 (0.190 IN.) (5 mm) nominal diameter. No. 10 (0.190 IN.) (5 mm) and larger sizes must be designed for any type of inserted driver, but may also provide for external wrenching of the head. A locking feature may be incorporated in the design of the head or threads. For items which are both shouldered and have an externally relieved body, use SCREW, EXTERNALLY RELIEVED BODY. For items with a No. 10 (0.190 IN.) (5 mm) or larger thread diameter without an inserted driver head, use BOLT, SHOULDER. Excludes BOLT, INTERNAL WRENCHING and SCREW, CAP, SOCKET HEAD.

Manufacturer Information:

AS232	84256	AVIBANK MFG., INC.
CA27025-1875	29372	HOWMET GLOBAL FASTENING SYSTEMS INC.
GB511DE1875	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION
GB511DE1875	84256	AVIBANK MFG., INC.

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	2.965 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH	3.180 INCHES MINIMUM AND 3.226 INCHES MAXIMUM
HARDNESS RATING	39.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER	1.250 INCHES NOMINAL
HEAD HEIGHT	0.312 INCHES NOMINAL
HEAD STYLE	ROUND W/WRENCH FLATS CHAMFERED
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL OVERALL
MINIMUM TENSILE STRENGTH	180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.875 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER	0.9990 INCHES MINIMUM AND 0.9993 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH	1.875 INCHES MINIMUM AND 1.891 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE	ROUND FIRST SHOULDER
SPECIAL FEATURES	DETENT BALLS IN SHOULDER
THREAD QUANTITY PER INCH	14
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
WIDTH BETWEEN FLATS	1.052 INCHES MINIMUM AND 1.064 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.478 INCHES NOMINAL

Click here to Register for Free 30-day Trial