|
|
|
National Stock Number:
5305-01-051-4324
Federal Supply Class:
5305
National Item Identification Number:
010514324
Description:
SCREW,MACHINE
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
| BACS12GM3-16 | 06710 | VALLEY-TODECO, INC. | | BACS12GM3-16 | 06725 | SPS TECHNOLOGIES, LLC | | BACS12GM3-16 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | BACS12GM3-16 | 17943 | FEDERAL MANUFACTURING CORP | | BACS12GM3-16 | 27624 | SPS TECHNOLOGIES LLC | | BACS12GM3-16 | 56878 | SPS TECHNOLOGIES, LLC | | BACS12GM3-16 | 81205 | THE BOEING COMPANY | | BACS12GM3-16 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | BACS12GM3-16 | 98524 | MONOGRAM AEROSPACE FASTENERS, INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | HEAD DIAMETER | 0.332 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SCREW MATERIAL | STEEL COMP 4037 OR STEEL COMP 8630 | | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE | | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE | | SPECIAL FEATURES | EXTENDED POINT ON THREADED END 57 TO 63 DEGREES | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.827 INCHES MINIMUM AND 0.920 INCHES MAXIMUM |
|
|